Product Description: Steering gear,also called steering gear, is the most important part of automobile steering system. Power steering (PAS) or steering assist system helps drivers steer by augmenting steering effort of the steering wheel. Power steering rack and pinion is the most important part for vehicle swerving and security assurance. It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction, thus making it easier to turn the wheels. Part Number: 23-1700 Fitment： Manual Steering Rack For 1982-1993 Ford Mustang 5.0L 611B 701B 16" Holes Product Description: Steering gear,also called steering gear, is the most important part of automobile steering system. Power steering (PAS) or steering assist system helps drivers steer by augmenting steering effort of the steering wheel. Power steering rack and pinion is the most important part for vehicle swerving and security assurance. It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction, thus making it easier to turn the wheels. Part Number: 23-1700 Fitment： 1974-78 Ford Mustang II 1974-80 Ford Pinto 1975-80 Mercury Bobcat Note: In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation. 1.In order to avoid the fault caused by the dirt entering the steering oil circuit, the plug on each oil port of steering pump of steering gear shall be opened before connecting the oil pipe, and the oil pipe and plug shall be carefully cleaned and deburred. 2. Turn the steering wheel to the straight ahead position. 3. Clean the mounting bracket of the steering gear and relevant mating surfaces of the steering gear. 4. For the adjustable steering column, use a suitable rope to pass through the space of the cross fork of the steering shaft, hang the steering shaft, and connect the steering shaft and the input shaft of the steering gear. 5. Turn the steering gear to the middle position to align the relevant marks at the input end and output end of the steering gear. 6. Install the steering gear on the mounting base and tighten the fixing bolts. 7. Universal joint or coupling between mounting column and steering gear. 8. For the adjustable steering column, the upper end seal of the steering gear shall not be damaged when the universal joint is installed. 9. Keep the steering wheel in straight ahead position. 10. Put the pitman arm on the steering gear to align the two marks. 10. Tighten the locknut according to the specified torque and rivet (anti loose pit) Symptoms of Power Steering Rack Failure You turn the steering wheel to go down the street, and the wheel is extremely stiff. You open the hood and look for an obvious problem. The power steering belt is still there, and the power steering is full. The power steering fluid is black as night, but it is full. The belt looks a little worn, and it's past the four-year power steering belt replacement interval. So you put a new one on. A few days later it happens again. This is what's known in the trade as "morning sickness." It doesn't get better, only worse. The cause is normal wear and tear on the internal parts of the power steering rack, or "the rack" as we call it. The black power steering fluid is black because of metal worn from the inside of the rack and had become like sandpaper, eating away at the rack. So you will need to replace the power steering rack and flush the power steering system to get rid of all the old fluid. Can I Replace the Power Steering Rack Myself? Replacing a power steering rack can be an easy job on some vehicles, rear wheel drive vehicles for example, or it can be most difficult and nasty in others. So how do you know if yours is an easy or hard one? Reading the removal procedure in a service manual will tell you what's involved, and you can decide if it is within your skill level. Be advised, however, that the manual may not be entirely accurate in that it will tell you to do something you may not have to do. For instance, on one Oldsmobile the book says you have to support the engine and lower the sub-frame by, at least, three inches. Well maybe you do, and maybe you don't. You can most often twist and turn and jiggle it out through the wheel well opening without too much difficulty. But read the procedure first. It will give you torque specifications, what, if any, nuts and bolts need to be replaced and if there are any "O" rings that you need to replace. Before taking anything apart. Look at the new rack. Take note of mounting bolt holes and the high pressure and return line fittings. Then jack up the X and support it with jack stands. Never go under a vehicle supported only by a jack. Take a look at where the mounting bolts are, where the steering column coupling is and the power steering lines. After looking at what the job entails, you may decide it is beyond your skills and have a shop do the job. Item Specifics Brand SpeedyAutoParts Manufacturer Part Number SPCB165462PS Type Rack & Pinion Complete Unit,Steering Rack,Steering Gear Performance Part Yes Installation method Performance/Custom Transmission Type Automatic Material High Quality Steel Surface Finish Polished, Rust Protected Manufacturer Warranty 3 Years Vintage Part Yes Fitment Type Direct Replacement Rack Type Manual Greasable or Sealed YES Other Part Number Steering gear Rack Material corrosion and rust prevention Note Backed by satisfying after-sales service Advantage Rotate quickly and normal position Interchange Part Number 611B,701B,231-700,hexsr2 Superseded Part Number D9FZ3504B,8000450,551-01082,SUS08236 OE/OEM Part Number rack replacement kit,rack and pinion,power rack parts OE Number Power Steering Rack,Steering Rack and Pinion Sub Type Rack and Pinion Assembly, Rack and Pinion Rack Gear Package Dust plug Universal Fitment No Itment Note Top performance For long service life Mounting Hardware Included As the picture Fits 1992-1993 Ford,1993 Mercury For 1993 Mercury nterchange Part Number 1974 1975 1976 1977 1978 1979 1980 Bobcat Mustang II Pinto Ford nterchange Part Number 2 Mercury 551-01082 Rack & Pinion Assembly Front Left Right Input Shaft Diameter 9/16"-26 Input Shaft Length 4 in Fitment 1 1974-78 Ford Mustang II with 16 Inches Between Mounts Fitment 2 1974-80 Ford Pinto with 16 Inches Between Mounts Item Length 45 in Fitment 3 1975-80 Mercury Bobcat with 16 Inches Between Mounts Feature Easy Installation New Manual Steering Rack & Pinion Fits 74-80 Mustang II Pinto Bobcat Manual Steering Rack & Pinion For Ford Mustang 2 II Mercury Bobcat 1974-1980 Steering Rack Pinion Assembly For 1976-1978 Ford Mustang Ford Pinto 1974 -1980 Payment Immediate payment is required during checkout. We will process and ship orders once checkout is completed. Shipping We offer international shipping through eBay global shipping program.We reserve the right to change shipping carrier and shipping method for efficient and on-time deliveries. Our store is not responsible for carrier delays such as weather or natural disasters. Returns All returns must be approved with a Return Material Authorization Number (RMA #) that must be included with the return To receive an RMA Please contact Our Customer Service. All returned products will be inspected. Returns processing may take up to 3 business days from the time your product is received at our return facility locations. Contact Us Often, Customers reach out to us to help confirm fitment of parts prior to purchase. We always recommend cross referencing a part number to ensure fitment as well. You may Contact Us by locating the "Contact Seller" Button within a listing. Feedback We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US Shop Category Store Home Sensor Power Steering Rack Starter Alternator Engine Mount Tire Snow Chains Other Hot Item Throttle Position Sensor For 2004-2010 Ford Explorer 4.0L 4.6L Ford F-150 5.4L USD 14.37 Alternator for 2004-2008 Ford F150 4.6L 5.4L 4L3U-10300-BA 4L3U-10300-B USD 88.21 THROTTLE POSITION SENSOR for 1997-2003 FORD F-150 TRUCK 4.2L, 4.6L and 5.4L USD 11.67 Alternator For Chrome Alternator BBC SBC Chevy Alternator GM 1 Wire Alternator USD 72.59 For Chevy One 1 Wire 105 Amp Delco 10Si Self-Exciting Alternator High Output New USD 64.89 New List Item Catalytic Converter For Evan Fischer For Impreza / Outback Front 2006-2011 16564 USD 159.81 Exhaust Flex Y Pipe Catalytic Converter For NISSAN Murano 3.5L 2003-2007 54498 USD 103.32 Exhaust Catalytic Converter For Chevrolet Cruze 2011-2016 EPA 50509 19518 16659 USD 66.46 Catalytic Converter For Nissan Murano 3.5L 2003 - 2007 Flex Y-Pipe 43205 744437 USD 109.06 Catalytic Converter For 2002-2005 Envoy Trailblazer 2004 2005 Rainier EPA 55476 USD 128.28 Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us Manual Steering Rack For 1982-1993 Ford Mustang 5.0L 611B 701B 16" Holes Product Description: Steering gear,also called steering gear, is the most important part of automobile steering system. Power steering (PAS) or steering assist system helps drivers steer by augmenting steering effort of the steering wheel. Power steering rack and pinion is the most important part for vehicle swerving and security assurance. It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction, thus making it easier to turn the wheels. Part Number: 23-1700 Fitment： 1974-78 Ford Mustang II 1974-80 Ford Pinto 1975-80 Mercury Bobcat Note: In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation. 1.In order to avoid the fault caused by the dirt entering the steering oil circuit, the plug on each oil port of steering pump of steering gear shall be opened before connecting the oil pipe, and the oil pipe and plug shall be carefully cleaned and deburred. 2. Turn the steering wheel to the straight ahead position. 3. Clean the mounting bracket of the steering gear and relevant mating surfaces of the steering gear. 4. For the adjustable steering column, use a suitable rope to pass through the space of the cross fork of the steering shaft, hang the steering shaft, and connect the steering shaft and the input shaft of the steering gear. 5. Turn the steering gear to the middle position to align the relevant marks at the input end and output end of the steering gear. 6. Install the steering gear on the mounting base and tighten the fixing bolts. 7. Universal joint or coupling between mounting column and steering gear. 8. For the adjustable steering column, the upper end seal of the steering gear shall not be damaged when the universal joint is installed. 9. Keep the steering wheel in straight ahead position. 10. Put the pitman arm on the steering gear to align the two marks. 10. Tighten the locknut according to the specified torque and rivet (anti loose pit) Symptoms of Power Steering Rack Failure You turn the steering wheel to go down the street, and the wheel is extremely stiff. You open the hood and look for an obvious problem. The power steering belt is still there, and the power steering is full. The power steering fluid is black as night, but it is full. The belt looks a little worn, and it's past the four-year power steering belt replacement interval. So you put a new one on. A few days later it happens again. This is what's known in the trade as "morning sickness." It doesn't get better, only worse. The cause is normal wear and tear on the internal parts of the power steering rack, or "the rack" as we call it. The black power steering fluid is black because of metal worn from the inside of the rack and had become like sandpaper, eating away at the rack. So you will need to replace the power steering rack and flush the power steering system to get rid of all the old fluid. Can I Replace the Power Steering Rack Myself? Replacing a power steering rack can be an easy job on some vehicles, rear wheel drive vehicles for example, or it can be most difficult and nasty in others. So how do you know if yours is an easy or hard one? Reading the removal procedure in a service manual will tell you what's involved, and you can decide if it is within your skill level. Be advised, however, that the manual may not be entirely accurate in that it will tell you to do something you may not have to do. For instance, on one Oldsmobile the book says you have to support the engine and lower the sub-frame by, at least, three inches. Well maybe you do, and maybe you don't. You can most often twist and turn and jiggle it out through the wheel well opening without too much difficulty. But read the procedure first. It will give you torque specifications, what, if any, nuts and bolts need to be replaced and if there are any "O" rings that you need to replace. Before taking anything apart. Look at the new rack. Take note of mounting bolt holes and the high pressure and return line fittings. Then jack up the X and support it with jack stands. Never go under a vehicle supported only by a jack. Take a look at where the mounting bolts are, where the steering column coupling is and the power steering lines. After looking at what the job entails, you may decide it is beyond your skills and have a shop do the job. Item Specifics Brand : SpeedyAutoParts Manufacturer Part Number : SPCB165462PS Type : Rack & Pinion Complete Unit,Steering Rack,Steering Gear Performance Part : Yes Installation method : Performance/Custom Transmission Type : Automatic Material : High Quality Steel Surface Finish : Polished, Rust Protected Manufacturer Warranty : 3 Years Vintage Part : Yes Fitment Type : Direct Replacement Rack Type : Manual Greasable or Sealed : YES Other Part Number : Steering gear Rack Material : corrosion and rust prevention Note : Backed by satisfying after-sales service Advantage : Rotate quickly and normal position Interchange Part Number : 611B,701B,231-700,hexsr2 Superseded Part Number : D9FZ3504B,8000450,551-01082,SUS08236 OE/OEM Part Number : rack replacement kit,rack and pinion,power rack parts OE Number : Power Steering Rack,Steering Rack and Pinion Sub Type : Rack and Pinion Assembly, Rack and Pinion Rack Gear Package : Dust plug Universal Fitment : No Itment Note : Top performance For long service life Mounting Hardware Included : As the picture Fits : 1992-1993 Ford,1993 Mercury For : 1993 Mercury nterchange Part Number : 1974 1975 1976 1977 1978 1979 1980 Bobcat Mustang II Pinto Ford nterchange Part Number 2 : Mercury 551-01082 Rack & Pinion Assembly Front Left Right Input Shaft Diameter : 9/16"-26 Input Shaft Length : 4 in Fitment 1 : 1974-78 Ford Mustang II with 16 Inches Between Mounts Fitment 2 : 1974-80 Ford Pinto with 16 Inches Between Mounts Item Length : 45 in Fitment 3 : 1975-80 Mercury Bobcat with 16 Inches Between Mounts Feature : Easy Installation New Manual Steering Rack & Pinion Fits : 74-80 Mustang II Pinto Bobcat Manual Steering Rack & Pinion For : Ford Mustang 2 II Mercury Bobcat 1974-1980 Steering Rack Pinion Assembly For : 1976-1978 Ford Mustang Ford Pinto 1974 -1980 Payment Shipping Returns Contact Us Feedback Immediate payment is required during checkout. We will process and ship orders once checkout is completed. We offer international shipping through eBay global shipping program.We reserve the right to change shipping carrier and shipping method for efficient and on-time deliveries. Our store is not responsible for carrier delays such as weather or natural disasters. All returns must be approved with a Return Material Authorization Number (RMA #) that must be included with the return To receive an RMA Please contact Our Customer Service. All returned products will be inspected. Returns processing may take up to 3 business days from the time your product is received at our return facility locations. Often, Customers reach out to us to help confirm fitment of parts prior to purchase. We always recommend cross referencing a part number to ensure fitment as well. You may Contact Us by locating the "Contact Seller" Button within a listing. We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! All rights reserved.
Specifics
- Advantage: Rotate quickly and normal position
- Brand: SpeedyAutoParts
- Feature: Easy Installation
- Fitment 1: 1974-78 Ford Mustang II with 16 Inches Between Mounts
- Fitment 2: 1974-80 Ford Pinto with 16 Inches Between Mounts
- Fitment 3: 1975-80 Mercury Bobcat with 16 Inches Between Mounts
- Fitment Type: Direct Replacement
- Fits: 1992-1993 Ford,1993 Mercury
- For: 1993 Mercury
- Greasable or Sealed: YES
- Input Shaft Diameter: 9/16"-26
- Input Shaft Length: 4 in
- Installation method: Performance/Custom
- Interchange Part Number: 611B,701B,231-700,hexsr2
- Item Length: 45 in
- Itment Note: Top performance For long service life
- Manual Steering Rack & Pinion For: Ford Mustang 2 II Mercury Bobcat 1974-1980
- Manufacturer Part Number: SPCB165462PS
- Manufacturer Warranty: 3 Years
- Material: High Quality Steel
- Mounting Hardware Included: As the picture
- New Manual Steering Rack & Pinion Fits: 74-80 Mustang II Pinto Bobcat
- Note: Backed by satisfying after-sales service
- OE Number: Power Steering Rack,Steering Rack and Pinion
- OE/OEM Part Number: rack replacement kit,rack and pinion,power rack parts
- Other Part Number: Steering gear
- Package: Dust plug
- Performance Part: Yes
- Rack Material: corrosion and rust prevention
- Rack Type: Manual
- Steering Rack Pinion Assembly For: 1976-1978 Ford Mustang Ford Pinto 1974 -1980
- Sub Type: Rack and Pinion Assembly, Rack and Pinion Rack Gear
- Superseded Part Number: D9FZ3504B,8000450,551-01082,SUS08236
- Surface Finish: Polished, Rust Protected
- Transmission Type: Automatic
- Type: Rack & Pinion Complete Unit,Steering Rack,Steering Gear
- UPC: Does not apply
- Universal Fitment: No
- Vintage Part: Yes
- gtin13: Does not apply
- nterchange Part Number: 1974 1975 1976 1977 1978 1979 1980 Bobcat Mustang II Pinto Ford
- nterchange Part Number 2: Mercury 551-01082 Rack & Pinion Assembly Front Left Right