Description : In use and daily maintenance, we should pay attention to the following points to extend the service life of the steering machine: 1. When driving on the potholed and uneven road, slow down and reduce the load borne by the steering gear. Steering Rack And Pinion Fits 2002-06 Lexus Es330 Base Sedan 4-Door 3.3L 3300Cc Description : In use and daily maintenance, we should pay attention to the following points to extend the service life of the steering machine: 1. When driving on the potholed and uneven road, slow down and reduce the load borne by the steering gear. 2. Frequently check the protective sleeves on both sides of the steering machine and the protective sleeves on the upper part of the steering machine connected with the universal cross. The damage of the sheath is the main factor that causes the early wear and damage of the steering gear . After the sheath is damaged, water and dust and sand will enter the steering gear through the damaged part, damaging the lubricating grease film of the gear rack, resulting in rust, abnormal wear and other phenomena inside the steering gear . If the internal water and sand are not disposed of immediately, the steering gear will be scrapped in a short time. Therefore, check the status of the dust-proof sheath at least once a month. If the sheath is damaged, it must be replaced immediately, and the steering machine shall be comprehensively inspected and maintained before replacement. 3. After the toe in is adjusted by four-wheel positioning and the steering rod is changed, pay special attention to the deformation and improper assembly of the protective sleeve, otherwise the protective sleeve will be damaged. 4. The lubricating grease will gradually become dirty and deteriorated during use, which will reduce the lubricating capacity; meanwhile, the materials under wear will gradually increase, and the wear phenomenon of abrasive particles will become more and more serious, which will aggravate the wear of steering gear . Every 100000 km or so, the steering gear shall be fully maintained, cleaned and re greased. 5. Due to the poor service conditions and heavy load, the steering gear must be equipped with special lubricating grease, which can not meet the use requirements. 6. The middle clearance of the steering wheel will gradually increase in use. If the left and right empty stroke of the steering wheel exceeds 15 degrees, the steering wheel must be inspected. If the abnormal wear of the gear rack is serious, the steering wheel assembly must be replaced. If there is no abnormal wear, but the clearance is too large, it can be adjusted. During the adjustment, it shall be carried out by trained professionals at the service station. After the adjustment, it shall be ensured that the steering wheel can be turned left and right to the limit position, with even force and flexible rotation. 7. Do not carry out the maintenance and repair of the steering machine at the roadside shop with simple equipment and low technical level. If the steering machine is not adjusted properly, it will cause jamming and endanger the driving and personal safety. el. If the steering machine is not adjusted properly, it will cause jamming and endanger the driving and personal safety. Fits the Following Vehicles: 2012 Lexus ES350 Base Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2012 Toyota Avalon Base Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2012 Toyota Avalon Limited Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2012 Toyota Avalon XLS Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2011 Lexus ES350 Base Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2011 Toyota Avalon Base Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2011 Toyota Avalon Limited Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2011 Toyota Avalon XLS Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2010 Lexus ES350 Base Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2010 Toyota Avalon Limited Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2010 Toyota Avalon XLS Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2010 Toyota Avalon XL Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2009 Lexus ES350 Base Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2009 Toyota Avalon Limited Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2009 Toyota Avalon XLS Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2009 Toyota Avalon XL Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2008 Lexus ES350 Base Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2008 Toyota Avalon Limited Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2008 Toyota Avalon Touring Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2008 Toyota Avalon XLS Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated Item Specifics Brand GDcar Manufacturer Part Number G108830D Part Type Rack & Pinion Complete Unit,Steering Rack,Steering Gear Performance Part Yes Installation method Performance/Custom Fitment Type Performance/Custom Material High Quality Steel Surface Finish Polished, Rust Protected Manufacturer Warranty 3 Years Vintage Car Part Yes Fitment Type Direct Replacement Rack Type Hydraulic Greasable or Sealed YES Other Part Number Steering gear Rack Material corrosion and rust prevention Note Backed by satisfying after-sales service Advantage Rotate quickly and normal position Interchange Part Number 26-2632,25693,19321045,3110213,36R0947 Superseded Part Number 4550339135,4425007101,4550309420 OE/OEM Part Number rack replacement kit,rack and pinion,power rack parts OE Number Power Steering Rack,Steering Rack and Pinion Sub Type Rack and Pinion Assembly, Rack and Pinion Rack Gear Package Dust plug Universal Fitment No Itment Note Top performance For long service life Mounting Hardware Included As the picture Fits LEXUS ES300 2002-2003 All Models For 2009 Lexus ES350 Base Sedan 4-Door 3.5L Shipping 1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address. 3. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service 4. If you have not received your shipment within 15 days from payment , please contact! Return 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS! 2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement. 4. Return shipping is to be paid by the Buyer Feedback We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. Payment 1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 10 days as auction ended or order might be delayed. Warranty 1,We stand behind every product we sell. 2,All of our brand new items come with a 60-Days money-back guarantee. 3,We define the item as defective only if it doesn't function as described. 4,It is the buyer's responsibility to understand the item description before bidding. 5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement. 6,We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 7,Shipping & handling cost are not refundable. 8,Man-made damage by abuse or wrong operation is not covered by this warranty. 9,No product liability insurance is assumed. Shop Category Store Home Mirror Parts ◈ Vehicle Mirrors ◈ Truck Mirrors ◈ Mirror Glasses & Other Parts Brake Parts ◈ Brake Rotors ◈ Brake Pads ◈ Brake Rotors + Pads Mass Air Flow Sensors Oxygen Sensors Cooling Parts ◈ Radiators ◈ Radiator Hoses ◈ Cooling Fans ◈ Fan Clutches ◈ Intercoolers AC Condensers Heater Cores Evaporators Wheel Hub Bearings Wheel Spacers Leveling Lift Kits Wheel Lug Nuts Knock Sensors Jack Stands Air Cleaner Filter Boxes Steering U-Joints Steering Shafts suspension kit ◈ cj Idle Air Control Valve 4 pcs wheel hub bearing Fender Flares ABS Speed Sensor Vehicle Speed Sensor Cargo Cover Hub Caps Pillar Posts Polisher Windshield Outer Trim Fuse Holder Box Brake System Parts ◈ Brake Pads & Brake Shoes ◈ Brake Calipers Radiator Support Tonneau Cover Wheel Hub Bearing Knuckle Bug Shield Window Visor Roof Rack Engine Timing Chain Kit Engine Timing Belt Kit Engine Repair Kit headlight assembly Harmonic Balancer Coolant Reservoir Thermostat Housing ATV Rear Wheel Axle Windshield wiper motor car tool Bumper Complete Struts Fuel Injectors Coilovers Steering Knuckle Air Shock Shock Struts & Suspension Kit & Hubs Lift Support Horn Tilt Trim Motor Power Brake Booster Dipstick Ballast Module Air Dryer Timing Chain Kit Mud Flaps Protection Shield & Lift Kit Air Intake Snorkel Cylinder Piston Kit Motorcycle Exhaust Pipe Strut Mount Adjustable Rear Control Arm Metal heat shield sleeve Brake Drums& Brake Shoes Shift Knob Lever Head Oil Catch Can Removal Tool Air Suspension Valve Solenoid steering knuckle-7 Window Regulator Winch Turbocharger Throttle Body Fuel Pump Transfer Case Shift Motor CV Axle Household Air Cooler Bushing Window Switch Bed Step Rubber Seal Strip Ignition Coils Driveshaft starter Stator Trailer Tools Spark Plug AC Compressor Airbag Hairspring Coil Spring Spoiler Other Hot Item (4) 1" Hubcentric 5x4.5 5x114.3 Wheel Spacers Fits Honda Accord Civic Acura RDX USD 63.20 (4) 1.5" Hubcentric 6x5.5 Wheel Spacers Fits Toyota Tacoma 4Runner Tundra Lexus USD 71.99 (4) 2" Hubcentric 6x5.5 Wheel Spacers Fits Toyota 4Runner Tacoma Tundra Sequoia USD 89.52 (4) 2" Hubcentric Wheel Spacers 5x5 Fits Jeep JK JKU Wrangler Grand Cherokee WK USD 89.98 20Pcs 12x1.25 Wheel Lug Bolts 28mm Shank 17mm Hex Fits Jeep Renegade Dodge Dart USD 24.29 Delivery New List Item Power Steering Pump w/ Pulley for Chevry Suzuki Tracker Grand Vitara V6 99-2006 USD 59.89 Power Steering Pump with Pulley For 2002-2009 Hyundai Getz 3.2L 3.5L 57110-1C000 USD 58.89 Fits CU186733M91 186733M91 Aluminum Tractor Radiator USD 156.10 Power Steering Pump w/ Pulley for Suzuki Grand Vitara 2006-2008 V6 2.7L 21-205 USD 60.89 Power Steering Pump with Pulley fits Mazda CX-7 L4 2.3L 2007-2012 2.5L 2010-2012 USD 64.89 Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us Steering Rack And Pinion Fits 2002-06 Lexus Es330 Base Sedan 4-Door 3.3L 3300Cc Description : In use and daily maintenance, we should pay attention to the following points to extend the service life of the steering machine: 1. When driving on the potholed and uneven road, slow down and reduce the load borne by the steering gear. 2. Frequently check the protective sleeves on both sides of the steering machine and the protective sleeves on the upper part of the steering machine connected with the universal cross. The damage of the sheath is the main factor that causes the early wear and damage of the steering gear . After the sheath is damaged, water and dust and sand will enter the steering gear through the damaged part, damaging the lubricating grease film of the gear rack, resulting in rust, abnormal wear and other phenomena inside the steering gear . If the internal water and sand are not disposed of immediately, the steering gear will be scrapped in a short time. Therefore, check the status of the dust-proof sheath at least once a month. If the sheath is damaged, it must be replaced immediately, and the steering machine shall be comprehensively inspected and maintained before replacement. 3. After the toe in is adjusted by four-wheel positioning and the steering rod is changed, pay special attention to the deformation and improper assembly of the protective sleeve, otherwise the protective sleeve will be damaged. 4. The lubricating grease will gradually become dirty and deteriorated during use, which will reduce the lubricating capacity; meanwhile, the materials under wear will gradually increase, and the wear phenomenon of abrasive particles will become more and more serious, which will aggravate the wear of steering gear . Every 100000 km or so, the steering gear shall be fully maintained, cleaned and re greased. 5. Due to the poor service conditions and heavy load, the steering gear must be equipped with special lubricating grease, which can not meet the use requirements. 6. The middle clearance of the steering wheel will gradually increase in use. If the left and right empty stroke of the steering wheel exceeds 15 degrees, the steering wheel must be inspected. If the abnormal wear of the gear rack is serious, the steering wheel assembly must be replaced. If there is no abnormal wear, but the clearance is too large, it can be adjusted. During the adjustment, it shall be carried out by trained professionals at the service station. After the adjustment, it shall be ensured that the steering wheel can be turned left and right to the limit position, with even force and flexible rotation. 7. Do not carry out the maintenance and repair of the steering machine at the roadside shop with simple equipment and low technical level. If the steering machine is not adjusted properly, it will cause jamming and endanger the driving and personal safety. el. If the steering machine is not adjusted properly, it will cause jamming and endanger the driving and personal safety. Fits the Following Vehicles: 2012 Lexus ES350 Base Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2012 Toyota Avalon Base Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2012 Toyota Avalon Limited Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2012 Toyota Avalon XLS Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2011 Lexus ES350 Base Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2011 Toyota Avalon Base Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2011 Toyota Avalon Limited Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2011 Toyota Avalon XLS Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2010 Lexus ES350 Base Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2010 Toyota Avalon Limited Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2010 Toyota Avalon XLS Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2010 Toyota Avalon XL Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2009 Lexus ES350 Base Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2009 Toyota Avalon Limited Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2009 Toyota Avalon XLS Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2009 Toyota Avalon XL Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2008 Lexus ES350 Base Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2008 Toyota Avalon Limited Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2008 Toyota Avalon Touring Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated 2008 Toyota Avalon XLS Sedan 4-Door 3.5L 3456CC V6 GAS DOHC Naturally Aspirated Item Specifics Brand : GDcar Manufacturer Part Number : G108830D Part Type : Rack & Pinion Complete Unit,Steering Rack,Steering Gear Performance Part : Yes Installation method : Performance/Custom Fitment Type : Performance/Custom Material : High Quality Steel Surface Finish : Polished, Rust Protected Manufacturer Warranty : 3 Years Vintage Car Part : Yes Fitment Type : Direct Replacement Rack Type : Hydraulic Greasable or Sealed : YES Other Part Number : Steering gear Rack Material : corrosion and rust prevention Note : Backed by satisfying after-sales service Advantage : Rotate quickly and normal position Interchange Part Number : 26-2632,25693,19321045,3110213,36R0947 Superseded Part Number : 4550339135,4425007101,4550309420 OE/OEM Part Number : rack replacement kit,rack and pinion,power rack parts OE Number : Power Steering Rack,Steering Rack and Pinion Sub Type : Rack and Pinion Assembly, Rack and Pinion Rack Gear Package : Dust plug Universal Fitment : No Itment Note : Top performance For long service life Mounting Hardware Included : As the picture Fits : LEXUS ES300 2002-2003 All Models For : 2009 Lexus ES350 Base Sedan 4-Door 3.5L Shipping Return Feedback Payment Warranty 1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address. 3. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service 4. If you have not received your shipment within 15 days from payment , please contact! 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS! 2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement. 4. Return shipping is to be paid by the Buyer We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. 1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 10 days as auction ended or order might be delayed. 1,We stand behind every product we sell. 2,All of our brand new items come with a 60-Days money-back guarantee. 3,We define the item as defective only if it doesn't function as described. 4,It is the buyer's responsibility to understand the item description before bidding. 5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement. 6,We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 7,Shipping & handling cost are not refundable. 8,Man-made damage by abuse or wrong operation is not covered by this warranty. 9,No product liability insurance is assumed. All rights reserved.

Specifics

  • Advantage: Rotate quickly and normal position
  • Brand: GDcar
  • Fitment Type: Direct Replacement
  • Fits: LEXUS ES300 2002-2003 All Models
  • For: 2009 Lexus ES350 Base Sedan 4-Door 3.5L
  • Greasable or Sealed: YES
  • Installation method: Performance/Custom
  • Interchange Part Number: 26-2632,25693,19321045,3110213,36R0947
  • Itment Note: Top performance For long service life
  • Manufacturer Part Number: G108830D
  • Manufacturer Warranty: 3 Years
  • Material: High Quality Steel
  • Mounting Hardware Included: As the picture
  • Note: Backed by satisfying after-sales service
  • OE Number: Power Steering Rack,Steering Rack and Pinion
  • OE/OEM Part Number: rack replacement kit,rack and pinion,power rack parts
  • Other Part Number: Steering gear
  • Package: Dust plug
  • Performance Part: Yes
  • Rack Material: corrosion and rust prevention
  • Rack Type: Hydraulic
  • Sub Type: Rack and Pinion Assembly, Rack and Pinion Rack Gear
  • Superseded Part Number: 4550339135,4425007101,4550309420
  • Surface Finish: Polished, Rust Protected
  • Type: Rack & Pinion Complete Unit,Steering Rack,Steering Gear
  • UPC: Does not apply
  • Universal Fitment: No
  • Vintage Part: Yes
  • gtin13: Does not apply